Mine in Sweden orders fleets of 20 electric loaders

December 11, 2023

LKAB, operator of the world’s largest underground iron ore mine, has ordered 12 Toro LH625iE cable-electric loaders and five Toro LH621i loaders, all equipped with Sandvik’s AutoMine solution, for its famed Kiruna Mine in northern Sweden. The order will more than double Kiruna’s electric Toro LH625iE fleet to 20, all of which will now be automated, and its total Sandvik loader fleet to 28 by the end of 2025.

“Sandvik and LKAB have a shared goal to boost production at the Kiruna Mine,” said Magnus Backe, general manager LKAB Kiruna. “This is a true partnership to increase tonnage and improve safety through automation.”

Developed in 2020 as a collaboration between LKAB and Sandvik to replace Kiruna’s aging fleet of 17 Sandvik LH625E loaders, the 25-t (27.5 st) payload Toro LH625iE is a revamped version of the industry’s largest-capacity underground loader.

“This investment supports our strategy towards a more electrified, autonomous and safer mine,” said Joel Kangas, Mine Manager at LKAB. “We need to excavate an enormous volume of rock from depths of up to 1,300 m (4,265 ft), and we will mine even deeper in the future. These depths present a prohibitive ventilation challenge for conventional equipment of the size we need to meet production demands. We worked closely on a daily basis with the Sandvik experts on site to ensure a seamless implementation. Ever since we put the first Toro LH625iE straight into a production environment more than three years ago, these loaders have been the backbone in our production system, exceeding our expectations, and we look forward to incorporating these new automated units into our operation.”

Kiruna was among the industry’s earliest adopters of cable-electric loading, trialing its first Sandvik unit in 1985. The oldest of Kiruna’s well-proven Sandvik LH625E loaders was 13 years old and had more than 40,000 production hours when what began as a project to modernize the loader and a side project to enhance its cable reeling system ultimately evolved into a completely upgraded loader model with the latest technology and new components.

Sandvik collaborated closely with LKAB to customize the design of Toro LH625iE to meet Kiruna’s needs. These included better energy efficiency than the original model with the same industry-largest payload capacity and a larger, more ergonomic operator’s cabin with a turning seat that swivels 180 degrees.

“Toro LH625iE has proven itself at the Kiruna mine, delivering an unrivaled production capacity of up to 500 t/h (550 stph),” said Mats Eriksson, President of Sandvik Mining and Rock Solutions. “Not only are these automated loaders extremely productive, they improve underground conditions and operator comfort with less heat, fewer vibrations and lower noise levels. Our partnership will create value for LKAB for years to come, and we look forward to continuing to support LKAB’s goals to mine more sustainably and productively.”

Toro LH625iE is 14 m (45 ft) long and features a 4-m (13-ft) wide, 9 m3 (317-cuft) bucket and an energy-efficient, IE4 classified electric motor to deliver a low cost per ton. It connects to Kiruna’s mine network via a 350-m (1,150 ft) trailing cable that enables an operating range of up to 700 m (2,300 ft).


Related article search: