ME home
 
  SME FaceBook SME Twitter SME LinkedIn RSS Feed

Subscriber or
SME Member Log On

WEB-ONLY CONTENT

Go to SME eNEWS

MINING INDUSTRY EVENTS

7th International Mali Mining And Petroleum  - Conference
Nov 21, 2017 - Nov 23, 2017
New Mexico Mineral Symposium  - Seminar
Nov 23, 2017
SME Arizona Conference  - Conference
Dec 3, 2017 - Dec 4, 2017
American Exploration & Mining Association Conf  - Conference
Dec 4, 2017 - Dec 8, 2017

METAL PRICES


Au
Ag
Pt
Pd
Ni
Cu
Al
Pb

AGGREGATES
AND MINERALS
MARKETPLACE


http://aggregatesmineralsmarketplace.com
The Mining Engineering, SME and NSSGA
Online Buyers Directory Site
The Online Global Mining and Minerals Library Site
November 2016
Volume 68    Issue 11

Computational fluid dynamic modeling of a medium-sized surface mine blasthole drill shroud

Mining Engineering, 2016, Vol. 68, No. 11, pp. 43-49
Zheng, Y.; Reed, W.R.; Zhou, L.; Rider, J.P.

DOI: https://doi.org/10.19150/me.6831

ABSTRACT:

The Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health (NIOSH) recently developed a series of models using computational fluid dynamics (CFD) to study airflows and respirable dust distribution associated with a medium-sized surface blasthole drill shroud with a dry dust collector system. Previously run experiments conducted in NIOSH’s full-scale drill shroud laboratory were used to validate the models. The setup values in the CFD models were calculated from experimental data obtained from the drill shroud laboratory and measurements of test material particle size. Subsequent simulation results were compared with the experimental data for several test scenarios, including 0.14 m3/s (300 cfm) and 0.24 m3/s (500 cfm) bailing airflow with 2:1, 3:1 and 4:1 dust collector-to-bailing airflow ratios. For the 2:1 and 3:1 ratios, the calculated dust concentrations from the CFD models were within the 95 percent confidence intervals of the experimental data. This paper describes the methodology used to develop the CFD models, to calculate the model input and to validate the models based on the experimental data. Problem regions were identified and revealed by the study. The simulation results could be used for future development of dust control methods for a surface mine blasthole drill shroud.



Please login to access this article.

OR

If you are not an SME member, you can join SME by clicking the button below.